Vibration Source Technology Co., Ltd.
Telephone: +886-2-26880999
Fax: +886-2-26880977
Address: No. 29, Ln. 65, Sanjun St., Shulin Dist., New Taipei City 238, Taiwan

Site Map

You are here: Home -> Products -> Drop Tester

As a professional Manufacturer, Supplier and Exporter with a factory in Taiwan, our main products include all kinds of Vibration Testers, Shock Tester, Drop Tester, Lithium Battery Tester products. We constantly upgrade our products as per the technological changes and requirements in the fast flourishing industry. It is our force to manufacture with the best quality and the most competitive price. If you are interested in any styles of our products, please feel free to contact us.

Drop Tester

VS-1013 - Drop Impact Tester : Drop Tester
- Dropping Ball: 1041g (diameter: 50.8mm), cylinder with spheric impacting face, control by electromagnet
- Test height: 0-200cm, free fall
- Tape measure: 200 cm tape measure is used to cope with indicator in reading the practical height instantly.
- Bottom plate: adopts steel that can prevent from jumping when impact, the dimension is 600x600mm
- The fixture and above can design for your need
VS-1018 - Drop Test Equipment : Drop Tester
- This tester is pneumatic controlled that makes the controlling accurately. Maximum payload: 65Kg; test height: 30-160cm; support arm size: 29x50cm; power source: 220V, 50/60Hz, single phase; pneumatic requirement: higher than 5kg/cm2.
- Escalate mechanism: adopt motor drive to adjust height.
- Testing angles: to drop the package based on its corner, face, and edge.
- Protecting switches: used to prevent the collision of tester’s mechanical parts from moving over the upper and lower limits of guiding rod.
- Tape measure: 160 cm tape measure is used to cope with indicator in reading the practical elevating and lowing height instantly.
- Bear plate: the whole plate adopts aluminum alloy for anti-oxidation and drops with small noise.
- Control button: adopts button-typed magnetic switch that allows the bear plate to fall automatically when pushing “DROP” button and also to adjust its height.
- Screw rod: adopts cylindrical screw rod design for smoothing up and down movement of bear plate.
- Control box: the control box is separated from the machine to prevent the operator from injury during the dropping of testing sample
- Guiding rod : one ψ150㎜ grinding rod used to prevent drop tester from swinging around.
- Horizontal level: there are four horizontal level used to adjust plane level of the base.
- Additional item 1: Clip fixture, especially for portable device.
- Additional item 2: Digital control box, that can control the lift automatically in order to solve the problem of indicating the height of higher than 160cm.
VS-1019 - Drop Test : Drop Tester
- This tester is pneumatic controlled that makes the controlling accurately. Maximum payload: 300Kg; test height: 0-130cm; support arm size: 100x100 cm; power source: 220V, single phase; pneumatic requirement: higher than 5kg/cm2.
- Escalate mechanism: adopt motor drive to adjust height.
- Testing angles: to drop the package based on its corner, face, and edge.
- Protecting switches: used to prevent the collision of tester’s mechanical parts from moving over the upper and lower limits of guiding rod.
- Tape measure: 100 cm tape measure is used to cope with indicator in reading the practical elevating and lowing height instantly.
- Bear plate: 3-5 frames a set and all adopt aluminum alloy for anti-oxidation and drops with small noise.
- Control button: adopts button-typed magnetic switch that allows the bear plate to fall automatically when pushing “DROP” button and also to adjust its height.
- Screw rod: adopts cylindrical screw rod design for smoothing up and down movement of bear plate.
- Control box: the control box is separated from the machine to prevent the operator from injury during the dropping of testing sample
- Guiding rod : three ψ150㎜ grinding rods used to prevent drop tester from swinging around.
- Horizontal level: there are four horizontal level used to adjust plane level of the base.
VS-6467 - Drop Testing : Drop Tester
- This tester is magnetic controlled to let the specimen to free fall. Maximum payload: 65Kg; test height: 40-200cm; applicable specimen size: 80x80x80cm; power source: 220V, 60Hz, single phase.
- Escalate mechanism: adopt motor drive to adjust height.
- Testing angles: to drop the package based on its corner, face, and edge.
- Protecting switches: used to prevent the collision of tester’s mechanical parts from moving over the upper and lower limits of guiding rod.
- Tape measure: 200 cm tape measure is used to cope with indicator in reading the practical elevating and lowing height instantly.
- Bear plate: the whole plate adopts aluminum alloy for anti-oxidation and drops with small noise.
- Control button: adopts button-typed magnetic switch that allows the bear plate to fall automatically when pushing “DROP” button and also to adjust its height.
- Screw rod: adopts cylindrical screw rod design for smoothing up and down movement of bear plate.
- Control box: the control box is separated from the machine to prevent the operator from injury during the dropping of testing sample
- Guiding rods: three grinding rods, in the middle, left and right position, used to prevent drop tester from swinging around.
- Horizontal level: there are four horizontal level used to adjust plane level of the base.

Serious working attitudes, high working efficiency, and outstanding work are the essence of the Company's growth principle. We can provide with best

Drop Tester

and thoughtful after-service.

The

Drop Tester

we offered is the industry standard for accurate, repeatable package drop tests. Every Drop Tester manufactured exceeds industry test standards and is factory calibrated and documented to these standards. A unique drop tester has been developed at EPL, which is able to conduct the drop tests repeatable and all the major parameters, such as impact force, accelerations, impact speed and the strains, can be recorded quantitatively. Our unique drop tester, on the other hand, can achieve rather consistent results with excellent repeatability. A two-way radio drop test is presented as the demonstration of the effectiveness of this unique drop tester. The impact force vs. time, and impact strain vs. time curves are shown below from six drop tests under the same drop condition.